Page 7 - FT FIRE FIGHTING & EMERGECY RESPONSE

PBI Matrix combines the high-performing, heat and flame protection of
PBI Gold with a durable matrix of high-strength 400 or 600 denier
filaments to reduce wear and tear. This combination results in:
• PBI flame and break-open protection
• Increased abrasion resistance
• Improved trap tears

Fabric Features:
PBI Matrix High Performance- Combines high-performing heat & flame
®
protection of PBI Gold with durable matrix of high-strength 400 or 600 denier
®
filaments to reduce wear & tear.
Complies with International Standards - NFPA 2112, EN 469:2005,
ISO 15025 (Flame spread) , EN 367 (Convective heat), ISO 6942 (Radiant
heat), ISO 17493: 2000 (Heat resistance ) and EN 1149-5 (Electrostatic
properties).

It is breathable membrane on the base of PTFE which mainly ensures
water resistance. It is mechanically and chemically resistant, with lower
flammability, comfortable in all extreme situations. It is mainly used in
firefighter´s garments and garments for industrial workers.

Fabric Features:
Waterproof- GORE-TEX fabrics withstand water-entry pressures
®
encountered during severe weather and in demanding applications.
Windproof - GORE-TEX fabrics prevent this windchill from happening FIREFIGHTING PROTECTION
®
by stopping the wind from passing through. The result – you preserve a
comfortable microclimate inside your gear.
Breathable - Allows the evaporating moisture to escape through the fabric.
This breathability leads to more comfortable and drier skin, even during
high exertion.

STEDAIR 3000: Using a combination of microporous and monolithic film
®
technologies, STEDAIR 3000 meets and exceeds all requirements of
®
NFPA 1971 (2013 edition) and provides incredible Total heat loss (THL)
and thermal protective performance (TPP).
Designed with a Teflon moisture barrier and laminated with the DuPont ™
Nomex E89™ substrate , the STEDAIR 3000 helps firefighters stay
®
®
cooler and more comfortable while providing extra protection against
water penetration, heat, and other harmful entities.

Fabric Features:
• Exhibits passing results after 10 wash/dry cycles at 140° F
• Remains waterproof to a minimum of 1 PSI after exposure to -4°F
• Attains a hydrostatic resistance of no less than 150 pounds per square inch
• The best combined THL and TPP in the industry

www.flowtronix.com | 7