Page 10 - FT SAFETY CATALOG 2017-2018

HEAD PROTECTION

BULLARD® INDUSTRIAL SAFETY HELMETS

Classic Series
* New and Improved C30
FlexGear® Art No: 1891BD83 URSPEC®
Ratchet • High Density Polyethylene shell (HDPE)
• Full-profile, wide-brim
• Accessory slots for attachments
• 6-point self-sizing pinlock suspension
with large, absorbent cotton brow pad
• Replacement brow pads available
• Standards: ANSI/ISEA Z89.1-2014,Type I,
Class E and G and CSA Z94.1-2015, Type 1,
Class E and G requirements
C30R
Art No: 1891BD83-R
Same as Model C30 above with
• 6-point Flex-Gear® ratchet suspension
with large, absorbent cotton brow pad RD YW OR BL GR WH GY

C33 URSPEC®
Art No: 1891BD98
• High Density Polyethylene shell (HDPE)
• Full-profile, full-brim
• 6-point self-sizing pinlock suspension
with large, absorbent cotton brow pad
• Replacement brow pads available
• Standards: ANSI/ISEA Z89.1-2014,Type I,
Class E and G and CSA Z94.1-2015, Type 1,
Class E and G requirements
C33R
Art No: 1891BD98-R
Same as Model C33 above with
• 6-point Flex-Gear® ratchet suspension RD YW OR BL GR WH GY
with large, absorbent cotton brow pad

Classic Series Hats and Caps
Bullard® Classic Series hard hats and caps continue to be the most comfortable hard
hats in the industry.
Comfortable
Featuring a wider profile than most hard hats, Classic caps and hats offer increased
protection from rain, snow, dust and harmful ultraviolet (UV) rays. With the Classic,
you’ll find a balanced fit with a comfortable six-point suspension.

Meets OSHA and ANSI Requirements
Conform to all OSHA and ANSI/ISEA Z89.1-2014 Type I, Class E and G requirements,
including impact, penetration and electrical. Models C30 and C33 also conform to
CSA Z94.1-2015, Type 1, Class E and G requirements.

Standard Series Hats and Caps

Style and versatility
The Standard by Bullard® takes style and versatility to a new level. A low-profile
shell, along with the Bullard® three-rib design and patented suspension system,
provide maximum comfort with a look workers prefer.

Meets OSHA and ANSI Requirements
Conforms to all OSHA and ANSI/ ISEA Z89.1-2014, Type I, Class E and G requirements,
including impact, penetration and electrical insulation. Bullard Model S62 (vented)
conforms to all OSHA and ANSI/ISEA Z89.1-2014, Type I, Class C requirements,
including impact and penetration. Model S51 also conforms to CSA Z94.1-2015,
Type 1, Class E and G requirements.
10 | “WE ARE TRUSTED TO DELIVER QUALITY”